EAN-no.: 4260052638460
- Description
- Download
- CE Declaration of Conformity
TECHNICAL SPECIFICATIONS
Connection cable length: 7.5m + 0.5m
Cinch video plug (male)
Image sensor: SHARP 1/4'' Color
Sensor type: CCD
Image standard: NTSC
Resolution in pixels: 512 x 492 (H x V)
Line resolution: 420 TVL (Enhanced)
Frame rate: 60Hz
Light sensitivity: 0 lux (IR illumination)
Number of infrared LED: 10 pieces
Lens aperture: 2.4mm
Horizontal viewing angle: 70°
Vertical viewing angle: 50°
Exposure time: 1/60~1/100,000 sec
Signal/noise ratio >48dB
White balance: automatic
Level adjustment: automatic
Output signal: Video via RCA 1.0 Vpp 75 Ohm
Working temperature: -30°C to +70°C
Operating voltage: 12 volts DC
Current consumption without infrared lighting: 80mA
Current consumption with infrared lighting: 146mA
Dimensions: 50x50x60mm
Protection class: IP67
Total weight: 0.2kg
E-approval: E13-10R00-10R02-3857-00,
CE: 960323L14,960323L13
IMPORTANT INSTALLATION NOTE
After installation, please tighten all the screws on the housing again to ensure perfect tightness. When cleaning the vehicle, avoid direct contact of the camera with high-pressure cleaners. Do not install the camera at the front of the vehicle in order to avoid damage to the camera, e.g. by loose gravel from vehicles driving in front.
LEGAL NOTICE
An increase in the vehicle dimensions, with the exception of passenger cars and motorcycles, must be registered and must be assessed immediately by the Technical Testing Center or an officially recognized monitoring organization (DEKRA, GTÜ, KÜS, TÜV). Before installing or converting, ask an officially recognized expert for motor vehicle traffic or a test engineer from a monitoring organization whether the operating license will be affected or whether the change can be approved at all. The return of a used camera for credit is excluded.
IMPORTANT NOTE
The connection cable of the KC203 is compatible with the connection cable of the KC202, but not with the connection cable of the KC201 and KC200.