EAN-no.: 4260052639634
- Description
- Download
- E-Mark
- Video Tutorials
- CE Declaration of Conformity
- Compatibility List
- Smartphone APP
NOTICE TO ORDER
We
recommend installation and programming by an authorized
dealer. This immobiliser is delivered with
the software of all vehicles listed in the compatibility list. We
may update the software or an authorized dealer if necessary. Please specify the exact vehicle type when ordering and we
will provide you with a vehicle-specific installation plan.
The
CAN BUS FIREWALL is probably the first retrofittable
immobiliser that communicates bi-directionally over up to two CAN bus and one LIN bus data
system.
This digital immobiliser helps protects your car from theft, Key
cloning,
Keyless range extension, learning vehicle keys, hacking the key code
from the
vehicle key, and even stealing the owners key. Only towing the car is
still
possible because a car thief will never be able to drive away with your
car.
The all new WFS400-PRO
is the third generation of the CAN BUS
FIREWALL
protection, and is a vastly improved version on its predecessor in many
ways,
and in its functionality.
The
WFS400-PRO no longer requires additional remote controls,
transponders or driver cards. No flashing LED or keypads can lead to
where
about’s the installation of the device is located in your vehicle. In
addition,
the electronics are extremely compact, so the installation can be
covertly
hidden within the vehicles wiring harness. The system is armed
automatically
when the ignition is switched off.
To
disarm the system, you have use existing switches
within your vehicle. You can designate your code using buttons on the
steering
wheel, the navigation or in the dash (the available buttons are vehicle
specific, these are listed in the compatibility list. You must enter
this code
before each trip. The combination you choose is like entering the PIN
of your
credit/debit card.
In addition the WFS400-PRO uses Bluetooth technology. You can deactivate this immobiliser either by switches in your car or wirelessly via Bluetooth. You can either use the optional transponder WFST400 or any compatible Apple iOS / Android smartphone. Of course, all our immobilisers have been tested for electromagnetic compatibility, have CE and E type approval and are registered with the WEEE.
We have aroused your interest in the WFS400-PRO, then contact us
or your authorized
dealer and get the benefits. In the compatibility list, you can check whether we have
already developed suitable software for your vehicle.
FEATURES
-
No cables in the vehicle are interrupted during installation
-
Immobilisation by CAN data communication with the control button of the
car
-
1 to 15-digit PIN code via CAN and LIN Bus supported buttons in the steering
wheel or dashboard
- The
WFS400-PRO electronics can not be tracked in the vehicle
-
The immobiliser can not be bypassed electronically
-
No radio signals are sent or received
-
No additional remote controls or transponders are needed
-
Uses the vehicle's own CAN and LIN data bus
- Silent
operation without relay click noise
- PIN code can be
changed at any time
-
Service mode for garages or valet parking
-
"Blocking" input for external control via optional GSM module
TECHNICAL
SPECIFICATIONS
- Operating voltage
9-15 VDC
- Sleep current
<8mA
- Working current
<36.5mA
- Dimensions 25x20x7mm
- Weight 21g (module with wiring loom)
- Bluetooth LE Chip nRF52832
DELIVERY
-
Immobiliser electronics with wiring loom
- Service
card
- German / English
instructions
-
One AMPIRE car window warning decals
WARRANTY
- 12 months
-
36 months warranty if professional installed by an authorized dealer
ORDER PROCESS
- The CAN bus immobilizer WFS400-PRO is always delivered with the software for all vehicles on the compatibility list. In case of a later vehicle change, we or an authorized dealer can update these vehicles. Please check in the compatibility list before your order if the CAN bus immobilizer is compatible with your vehicle. Please indicate the car brand and the exact vehicle type in your order and we will provide you with a vehicle specific installation plan as a color print.
DIG1 ARTICLE
- In the compatibility list you may find a DIG1 note. This DIG1 note informs you if a resistor or relay is needed for the installation in your specific vehicle. If there is a DIG1 article for your vehicle type, please order it at the same time.
HOMOLOGATION AND APPROVALS
- E-Mark E20*116R00/08*004022*00
- E-Mark E20*10R06/01*004683*00
- ETSI EN 301 489-1 V2.1.1 (2017-02)
- ETSI EN 301 489-3 V1.6.1 (2013-08)
- Radio Equipment Directive (RED) 2014/53/EU
- ECE-R10 - R&TTE
- CE conform
- WEEE-Nr. DE54949565
- VdS Class II
Mit freundlichen Grüßen,
Stefan
Erst dann bekommt ihr die 5 Sterne.