RETROSOUND radio module (FM / DAB+) including installation material

The "MOTOR-6DAB" is a radio module with all cables and accessories but without the display unit. This display unit, the control knobs and the rear control rings must be ordered separately.

It has Bluetooth hands-free, A2DP audio streaming and Apple iPhone control. The touchscreen operation of the Apple iPhone is still active in parallel. Of course, the "MOTOR-6" radio module also supports the flexible "InfiniMount" mounting system for the control knobs, patented by RetroSound. With this unit, you retain the design of your classic and do not have to do without modern digital media. Two USB and one AUX input on the rear panel allow you to play an external audio source.

Any concerns that your H-licence plate might be in danger due to the installation of a RetroSound car radio are unfounded. In the download you will find a confirmation with the approval of the complete AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) which states that the "RetroSound Model Zuma" and the "RetroSound Model Two" including vehicle-specific panel and control buttons may be installed in classic cars with H-plates or do not prevent the award of the H-plate!

EQUIPMENT
- Playback of MP3 and WMA files via the rear USB input
- Apple iPhone control (touch screen operation of the Apple iPhone is still active in parallel)
- Bluetooth hands-free kit with A2DP audio streaming
- Adjustable LCD lighting with 32,000 different colours
- DAB+/UKW/MW radio receiver with RDS and 30 station presets
- Tuner with European even and odd radio frequencies
- Integrated 4-channel amplifier (4x 24 watts RMS / 45 watts max.)
- 3 stereo RCA outputs for external amplifiers (front/rear/subwoofer)
- 3 equaliser programmes plus individual bass/treble/fader/balance adjustment
- XBAS loudness function
- Non-volatile memory

EXPANSION OPTIONS
- 2 USB inputs (rear of unit) up to max. 32GB
- 1 AUX input (stereo, 3.5mm jack)
- 3 Cinch outputs (stereo) for external amplifiers (front/rear/subwoofer)
- Separate power cable for motor antenna and amplifier

SCOPE OF DELIVERY
- Radio base module
- Main wiring harness
- ISO connection cables (power & loudspeaker harness)
- Screw and fixing material
- Microphone for hands-free function
- Spacer washers
- Mounting plate with accessories
- Mounting bracket

TECHNICAL DATA RADIO PART
- VHF European broadcasting Frequency range 87.5-107.9 MHz. (0.05 MHz. in steps)
- MW Frequency range 530-1710 kHz (9 kHz. in steps)
- DAB+ reception via SMB antenna input for passive DAB+ antennas

GENERAL DATA
- Dimensions of radio 101x51x136mm
- Power supply 10.5 to 14.4 volts
- Maximum current consumption 15 amps
- Quiescent current 3.5 mA
- Output power 12V, 4 Ohm, <1% distortion: 4x15 Watt sine wave
- Loudspeaker impedance 4-8 Ohm
- Cinch outputs 6 channel 2.85 volts for external amplifiers (front/rear/subwoofer)
- Input sensitivity AUX (3.5mm jack) >300 mV / 6 kOhm

IPHONE COMPATIBILITY
You can of course control an Apple iPhone wirelessly via Bluetooth with this car radio. If you want to control it wirelessly, you will also need an appropriate USB adapter cable.

LEGAL NOTICE
iPhone are trademarks of APPLE Computer, registered in the USA and other countries For best results, Apple has established certain compatibility requirements for accessory manufacturers. Products that are designed and certified to be compatible will display the "Made for" mark on the packaging. To ensure compatibility when purchasing third-party accessories for use with your device, look for accessories with the "Made for" label for your device (see below).
"Made for iPhone" means that an electronic accessory is designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.

E-APPROVAL
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00

VEHICLES WITH 6 VOLT ELECTRICAL SYSTEM
You need a voltage converter if you want to operate a RetroSound car radio in a vehicle with a 6 volt electrical system. We recommend the DC/DC converter 2238.0 from Statron (www.statron.de) in such a case.

*IMPORTANT NOTE
Please order the display unit and control knobs for your car separately. These are not included with the car radio.

COMPATIBLE DISPLAY UNITS
- APACHE
- DALLAS
- DAYTONA
- DETROIT
- EUROPE
- GRAND PRIX
- HUNTINGTON
- MONTEREY
- NEW YORK
- NEWPORT
- REDONDO-S
- REDONDO-T
- RETRO-RADIO-B
- RETRO-RADIO-BC
- RETRO-RADIO-C
- RETRO-RADIO-CB
- RETRO-RADIO-IVO
- SANTA CRUZ
- WONDERBAR WB1
- WONDERBAR WB2