NAVLINKZ Handlebar camera (AHD), for Audi, Skoda and VW

NavLinkz vehicle-specific replacement rear door handle with integrated AHD reversing camera and distance lines that can be switched off. Simple installation by replacing the factory rear door handle. Professional system cable set in sufficient length and with automotive connectors. The cable is easier to lay thanks to the small diameter plug. Additional wire for signal feed-through, e.g. power supply or reversing signal.

Product features
Vehicle-specific replacement rear door handle with integrated reversing camera (black)
System cable with feed-through, e.g. for reversing signal
Sensor type CMOS AHD NTSC
Resolution 1080p
Frame rate 30fps
Light sensitivity 0.2 lux
F1.2 aperture
Angle horizontal 140°, vertical 85°, diagonal 170°
Mirrored image (fixed)
Distance lines can be switched off (switched on ex works)
Protection class IP68
10.00m total system cable length, consists of:
- 1.50m cable to camera to 4-pin BM system cable socket (diameter 5mm)
- 8.10m extension 4-pin BM plug to 4-pin BM socket
- 0.40m adapter 4-pin BM plug to cinch plug + power supply (open ends)

Compatibility
Audi A1 (8X) 07/2010-05/2018
Skoda Fabia2 (5J) 03/2007-27.05/2012
Skoda Octavia2 (1Z) 02/2004-02/2013
Skoda Octavia2 Combi (1Z) 01/2005-02/2013
Skoda Roomster (5J) 05/2006-27.05/2012
Skoda Roomster Scout/Praktik (5J) 04/2007-2010
Skoda Superb 2 (3T) 06/2008-ca. /2014
Skoda Superb 2 Combi (3T) 01/2010-27.05/2012
Skoda Yeti (5L) 08/2009-27.05/2012
Volkswagen Golf 5 Variant (1K) 06/2007-04/2009
Volkswagen Golf 6 Variant (5K) 05/2009-30.06/2012
Volkswagen Golf 6 Plus (1KP) 12/2008-28.05/2012

Dimensions
Complete 92 x 35 x 70mm (W x H x D)
Installation opening 72 x 19mm (W x H)
Hole spacing 50mm

Technical data
Operating voltage 12V DC (6V~16V)
Current consumption max. 70mA
Suitable for continuous operation (ACC) No
Operating temperature range -20°C to +70°C
Storage temperature range -40°C to +85°C