NAVLINKZ Handle bar camera Mercedes Vito W447 with OEM camera

NavLinkz vehicle-specific replacement rear door handle with integrated reversing camera and distance lines that can be switched off. This set is for replacing the digital factory rear view camera of the W447/W448 when replacing the Audio30/Audio40 (Garmin versions) with an aftermarket head unit. The set includes cable adapters and connectors that allow the factory camera cable and power supply to be used.

Includes factory trunk opening button - this is required when replacing a factory reversing camera.


Product features
1/3 inch CMOS NTSC sensor (PC3089)
Resolution 720 x 480 pixels (700 TV lines)
0.1 lux light sensitivity
F1.2 aperture
Angle diagonal 170°, horizontal 130°, vertical 90°
Mirrored image (fixed)
Distance lines can be switched off (switched on ex works)
IP68 protection class
Black rear door handle and camera
Incl. factory trunk opening button
Adapter Fakra plug to Cinch socket (for rear)
Adapter Fakra plug to cinch plug (for front)
MQS pins and 2 housings (power tap)
1.8m camera cable with 4-pin BM system cable socket (diameter 5mm)
8m system extension cable (4-pin BM) with wire for signal feed-through
4-pin BM system connection cable with cinch plug and fuse

Compatibility
Mercedes Benz Vito (W447/448) with tailgate
For vehicles with factory reversing camera

Dimensions
Complete 215 x 53 x 65mm (W x H x D)
Installation opening 150 x 42mm (W x H)
Hole spacing 170mm

Technical data
Operating voltage 12V DC (6V~16V)
Current consumption 40mA
Power consumption 0.5W
Operating temperature range -20°C to +70°C
Storage temperature range -40°C to +85°C
Weight incl. cable approx. 317g