NAVLINKZ Handle bar camera Mercedes-Benz

NavLinkz vehicle-specific replacement rear door opener switch with integrated reversing camera and distance lines that can be switched off. Simple installation by fitting into the factory rear door handle. Professional system cable set of sufficient length and with automotive connectors. The cable is easier to lay thanks to the small diameter plug. Additional wire for signal feed-through, e.g. power supply or reversing signal.

Product features
Vehicle-specific replacement rear door handle with integrated reversing camera (black)
System cable with feed-through, e.g. for reversing signal
Sensor type 1/4 inch CMOS NTSC HD low-light sensitive
800 TV lines
Light sensitivity 0.1 lux
Aperture F1.2
Angle diagonal 180°, horizontal 140°, vertical 105°
Mirrored image (fixed)
Distance lines can be switched off (switched on ex works)
Protection class IP69K
9.00m total system cable length, consisting of
- 0.6m camera cable with 4-pin 3V system cable socket (diameter 5mm)
- 8.00m extension 4-pin 3V plug to 4-pin 3V socket
- 0.40m adapter 4-pin 3V plug to cinch plug + power supply (open ends)

Compatibility
Mercedes Benz CL C216,
Mercedes Benz CLS C218, X218 (Shooting Brake),
Mercedes Benz S-Class W221,
Mercedes Benz SLK R172 up to 23.12.2014

NOT suitable for:
Mercedes Benz A-Class (W169), B-Class (W176), C-Class (A205, C205), CL (C215), GLC Coupé (C253), GLE (C292), GLS (X167), M-Class (W164), S-Class (W222, W223), SLK (R171)

Dimensions
Complete 89x37x88mm (W x H x D)
Installation opening 89x59mm (W x H)

NOTE: Please check that the size specifications and mounting points of the camera match those of the vehicle before purchasing!

Technical data
Operating voltage 12V DC (6V~16V)
Current consumption 50mA
Power consumption 0.6W
Operating temperature range -30°C to +75°C
Storage temperature range -40°C to +80°C