NAVLINKZ Handle bar camera Mercedes-Benz (A/B/C/CLA/GL../ML/V/Vito)

NavLinkz vehicle-specific replacement rear door handle with integrated reversing camera and distance lines that can be switched off. Simple installation by replacing the factory rear door handle (the existing factory trunk opening button is still required and is installed in the replacement rear door handle). Professional system cable set of sufficient length and with automotive connectors. The cable is easier to lay thanks to the small diameter plug. Additional wire for signal feed-through, e.g. power supply or reversing signal.

Product features
Vehicle-specific replacement rear door handle with integrated reversing camera (black)
System cable with feed-through, e.g. for reversing signal
Sensor type 1/3 inch CMOS NTSC (PC3089)
Resolution 720 x 480 pixels (700 TV lines)
Light sensitivity 0.4 lux
Aperture F1.2
Angle diagonal 170°, horizontal 130°, vertical 90°
Mirrored image (fixed)
Distance lines can be switched off (switched on ex works)
IP68 protection class
10.00m total system cable length, consisting of
- 1.50m cable to camera to 4-pin BM system cable socket (diameter 5mm)
- 8.10m extension 4-pin BM plug to 4-pin BM socket
- 0.40m adapter 4-pin BM plug to cinch plug + power supply (open ends)

Compatibility
Mercedes Benz A-Class (W176/W177),
Mercedes Benz B-Class (W247),
Mercedes Benz C-Class Estate (S205),
Mercedes Benz CLA Shooting Break (X117),
Mercedes Benz GL (X166),
Mercedes Benz GLA (X156/H247),
Mercedes Benz GLB (X247),
Mercedes Benz GLC SUV (X253), NOT suitable for GLC Coupé (C253).
Mercedes Benz GLE (W166/W167),
Mercedes Benz GLS (X166/X167),
Mercedes Benz ML-Class (W166),
Mercedes Benz V-Class (W447/W448) with tailgate,
Mercedes Benz Vito (W447) with tailgate

NOT suitable for vehicles with factory rear view camera. VSC-E-ME15-B is suitable for this.

Dimensions
Complete 215 x 53 x 65mm (W x H x D)
Installation opening 150 x 42mm (W x H)
Hole spacing 170mm

Technical data
Operating voltage 12V DC (6V~16V)
Current consumption 40mA
Power consumption 0.5W
Operating temperature range -20°C to +70°C
Storage temperature range -40°C to +85°C