AMPIRE camera (AHD), for Citroën Berlingo 3, Peugeot Rifter, Opel Combo E

High-resolution AHD reversing camera KVA-BERLINGO which is fitted in place of the factory-fitted brake light glass.

COMPATIBILITY
- Citroen Berlingo 3 (from model year 2018)
- Fiat Doblo 3 (K9) (from year of construction 2022)
- Opel Combo E (from year of construction 2018)
- Peugeot Rifter (from year of construction 2018)
- Toyota Proace City (from year of construction 2020)

TECHNICAL DATA
- Video standard AHD 1080P 25F
- Image sensor: GC2399 (FH8536H)
- Image sensor size 1/2.7
- Resolution 1920x1080 pixels
- 3D noise reduction
- Sequential scanning
- Minimum illumination: 0.005 lux
- Signal-to-noise ratio >50dB
- Automatic white balance
- Image reproduction horizontally mirrored
- Auxiliary lines: switched on (can be switched off by disconnecting cable loop)
- Horizontal viewing angle 155°
- Vertical viewing angle 100°
- Diagonal viewing angle 185°
- Camera head vertically adjustable up to 20
- Protection class IP69 waterproof
- Operating voltage: 9-16 Volt DC
- Power consumption: max. 75mA
- Operating temperature: -20° to 70°C
- Colour: black
- Cable length: 10 metres with 4-pin MINI-DIN plugs
- E approval E9*10R06/00*22328*00
- CE approval EN 55022: 2010; EN 61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008; EN 55024:2010
- FCC approval ANSI C63.4-2003

SCOPE OF DELIVERY
Rear view camera
AK1035 Power supply unit
AK1034 Mini-DIN extension cable 10m

IMPORTANT NOTE
Depending on the roof structure and the trailer coupling installed on the vehicle, it may not be possible to see the trailer coupling on the monitor.
This AHD camera can only be connected to AHD1080P 25F compatible monitors and video feeders and is not compatible with CVBS (FBAS) monitors and video feeders for an NTSC video signal.

INSTALLATION NOTE
Some vehicles require an optional relay to pick up the reversing signal.

INSTALLATION NOTE
Insert a W5W bulb into the plug-in socket provided (included in the scope of delivery). Otherwise the brake light will be displayed as defective in the on-board computer.
Never use the original W21W bulb, as the camera may be damaged by overloading.