AMPIRE rear view camera (CVBS), 95°, 35.5mm, universal, black

With the KVX200, Ampire is launching a new reversing camera on the European market that has been specially developed for use on vans / panel vans / motorhomes. The well-known problem: a reversing camera cannot be easily fitted to vehicles with rear doors. If a conventional body-mounted camera is used, it can be aligned downwards, but the rear of many vehicles is slightly rounded at the top. A normal reversing camera would capture this curvature and thus obscure the trailer coupling, the running board or the bumper.
With the special housing of the reversing camera, the camera module itself is positioned above the curvature and thus captures the entire rear wall, bumper, etc. This makes precise manoeuvring possible. This makes precise manoeuvring possible, especially when only a few centimetres are involved. The angle of the camera module can be adjusted so that it can be perfectly adapted to the conditions on your vehicle.
Suitable for universal roof mounting on vans and buses such as Mercedes-Benz Sprinter, Fiat Ducato, Volkswagen Crafter and similar vehicles.

HIGHLIGHTS
- Reversing camera specially designed for use in vans, panel vans and motorhomes
- The angle of the camera module can be adjusted for perfect adjustment of the field of vision
- The 10 integrated infrared diodes support visibility even in complete darkness
- Robust workmanship
- Visually appealing design
- Suitable for 24/7 continuous operation

EQUIPMENT
- Design: Surface-mounted sphere with 35.5mm diameter
- Illumination: via 10 infrared LEDs
- Sensor type: 1/3 SONY CCD
- Image system: NTSC
- Resolution (pixels) HxV 976x494
- Minimum brightness: 0 Lux
- Resolution TV lines 700 lines
- Viewing angle 135° diagonal
- Viewing angle 95° horizontal
- No distance lines
- Image reproduction: mirrored
- IP68 protection class
- 15m cable set (Mini 8P)
- Supply voltage 12/24 Volt DC 10%
- Power consumption 1.5 Watt
- Operating temperature range -30°C to +70°C
- Storage temperature -40°C to +80°C
- Camera dimensions 212 x 133 x 74mm (L x W x H)
- Connection cable: 15m
- E approval E9*10R06/00*22328*00

SCOPE OF DELIVERY
Rear view camera
AK1001
AK1011
AK1012

LEGAL NOTICE
An increase in vehicle dimensions, with the exception of cars and motorbikes, is subject to registration and must be inspected immediately by the technical inspection authority or an officially recognised inspection organisation (DEKRA, GTÜ, KÜS, TÜV). Before installing or modifying the camera, ask an officially recognised expert for motor vehicle traffic or a test engineer from a monitoring organisation whether the operating permit will be affected or whether the modification can be approved at all. The return of a used camera for credit is excluded.