AMPIRE Mini surface-mounted reversing camera (AHD) 137°, 10m cable

The KCA202 mini body-mounted camera with wide-angle optics is a reversing camera with a limitless range of applications in cars, buses, motorhomes, trucks or trailers.
The matt black plastic housing is particularly weather-resistant, IP69K waterproof and very sturdy. The bracket is made of powder-coated stainless steel with stainless steel screws.
Supplied complete with a 10 meter extension cable with high quality copper strands.

FEATURES
- AHD wide-angle camera in plastic housing
- Can be used in 24/7 continuous operation
- IP69K waterproof with stainless steel bracket
- Infrared night vision illumination

SCOPE OF DELIVERY
- Surface-mounted camera with bracket
- 10m extension cable AK1039
- Power supply unit AK1037
- operating instructions

TECHNICAL DATA
- Image sensor type AHD 1/4 2729
- Video signal 1080P with 25 frames/second
- Resolution 1920x1080 pixels
- Guide lines: switched on by default (can be switched off)
- Matt black plastic housing with stainless steel mounting
- Image display mirrored (adjustable)
- DIN protection class IP69K
- Exposure 1/50-60~1/15000 seconds
- Signal-to-noise ratio =>60.5dB
- Dynamic range >>74dB
- Light sensitivity 0 Lux with IR illumination
- Output signal 1.0Vp-p, 75 OHM (AHD)
- Automatic white balance
- Automatic video level adjustment
- Operating voltage 6 to 26 Volt DC
- Power consumption 200-230mA @ 12 Volt
- Diagonal viewing angle 160°
- Horizontal viewing angle 137°
- Vertical viewing angle 77°
- Camera dimensions 60x40x40mm
- Dimensions camera with bracket 72x55x45mm
- Operating temperature -40°C to +75°C
- Storage temperature -60°C to +105°C
- E certified

APPROVALS
CE Directive of 2004/108/EC, EN55022: 2010, EN 55024: 2010 Report No. STR12058091E
FCC Part 15B Report No. STR12058092E-3

FURTHER SEARCH TERMS
KC201, kc201, KC202, kc202,

ORDER NOTE
This camera is a high-resolution AHD camera with 1080P resolution and 25 frames/second. This camera can only be connected to compatible monitors, car radios or interfaces. If the camera input on your monitor can only display a video signal in CVBS, FBAS or NTSC, this AHD camera is unsuitable and you should use the identical CVBS camera with NTSC video signal.