NAVLINKZ front- + rear-view cam input Audi MMI3G(+) 4pin HSD

r.LINK video insertion for Audi MMI 3G/3G+ basic/high or with monitor with 4pin HSD LVDS connector and for VW RNS850. For connection of a rear-view camera, a front camera and an additional video source.


Product features

Video-Inserter for Factory-Infotainment Monitors
Rear and Front Camera FBAS Input
FBAS Video Input for After-Market Devices (e.g. DVD-Player, DVD-Tuner)
Automatic Switching to Rear View Camera Input by Engagement of Reverse Gear
Manual Switching to Front Camera by Keypad or MMI button
Activatable Parking Guide Lines for Rear-View Camera (not all vehicles)
Video-in-motion (ONLY for connected video-sources)
AV-inputs PAL/NTSC compatible



Compatibility

Compatible to Audi MMI 3G/3G+ basic/high or with monitor with 4pin HSD LVDS connector and for VW RNS850.

Used inter alia in the following vehicles:

A1 (8X)
A4 (8K, 8K allroad)
A5 (8T)
A6 (4F/4F allroad)
A6 (4G) bis ca. 10/2014
A7 (4G)
A8 (4E/4H)
Q5 (8R)
Q7 (4L)
Touareg from 2011


NOT compatible to Q3 (8U)!

Compatible interfaces:

Q3 (8U) = RL2-MMI3G-Q3


Limitations

Video onlyThe interface inserts ONLY video signals into the infotainment. For sound use the possibly existing factory-audio-AUX-input or a FM-modulator.
Factory OPSDisplay of an optical park display (OPS) isn"t possible if an after-market rear-view camera is connected and reverse gear is engaged. Acoustic signals are still existing.
Factory rear-view cameraAutomatic switch-back from inserted video to factory rear-view camera only while reverse gear is engaged. To delay the switch-back time, additional electronics is required.


Specifications (video-interface)

BATT/ACC range 7V 25V
Stand.by power drain<10mA
Power consumption4.8W
Video input formatsPAL/NTSC
RGB-video amplitude0.7V with 75 Ohm impedance
Temperature range-40°C to +85°C
Weight278g
Dimensions
113 x 22 x 92 mm (B x H x T)