NAVLINKZ Video feeder AHD/FBAS/HDMI suitable for Ford Sync4

The video interface enables a reversing camera, a front camera with automatic and any two video sources (for side cameras or other retrofit devices such as USB players, DVB-T2 tuners, etc.) to be fed into the vehicle manufacturer's factory infotainment system. The video interface also has an HDMI input that can be used for an HD reversing camera or another HDMI source (e.g. iOS/Android device, laptop, streaming stick).

Product features
Video feeder for factory infotainment systems
1 FBAS/AHD input for reversing camera
1 FBAS/AHD input for front camera
2 FBAS/AHD inputs for side cameras or other retrofit devices (e.g. USB devices, DVB-T2 tuner, etc.)
All inputs NTSC and PAL compatible
Supported AHD resolutions 720p NTSC (30Hz), 720p PAL (25Hz), 960p NTSC (30Hz), 960p PAL (25Hz), 1080p NTSC (30Hz), 1080p PAL (25Hz)
1 HDMI input for HD reversing camera or other HDMI source (e.g. iOS/Android device, laptop, streaming stick, DVB-T2 tuner, etc.)
Automatic switching to reversing camera input in reverse gear
Automatic front camera switching after reverse gear for 5, 10, 15 or 20 seconds
Driveway lines for reversing camera can be activated (not available for all vehicles)
PDC graphics can be activated (not available for all vehicles)
Picture free while driving (ONLY for fed-in video sources)

Compatibility
Ford Bronco from 06/2021 Sync4 full version with APIM module and 12 or 13.2 inch tablet monitor
Ford Focus from model year 2022 Sync4 full version with APIM module and 12 or 13.2-inch tablet monitor
Ford Kuga 3 facelift from 06/2024 Sync4 full version with APIM module and 12 or 13.2-inch tablet monitor
Ford Mustang 7 from 02/2024 Sync4 full version with APIM module and 12 or 13.2-inch tablet monitor
Ford Tourneo Custom 2 from 07/2023 Sync4 full version with APIM module and 12 or 13.2-inch tablet monitor
Ford E-Transit from 11/2020 Sync4 full version with APIM module and 12 or 13.2-inch tablet monitor
Ford Transit Custom 2 from 07/2023 Sync4 full version with APIM module and 12 or 13.2-inch tablet monitor

Connections
Image feed: 4+2 pin HSD
Power and CAN bus: Plug & Play (vehicle-specific)
Video inputs (2x): Cinch sockets
Rear view camera input: Cinch socket
Front camera input: Cinch socket
Trigger cables (4x): Open cable ends
Additional video input: HDMI
HDMI audio output: 3.5mm jack socket

Technical specifications
Operating voltage 12V DC (9~16V)
Quiescent current 5mA
Current consumption 270mA
Video input 0.7~1V
Video input signal types FBAS/AHD/HDMI
Signal standards FBAS/AHD NTSC/PAL
Temperature range -40°C to +85°C
Video box dimensions 117 x 25 x 108mm (W x H x D)