Item no.: RL-MFD3
EAN-no.:
EAN-no.:
- Description
- Download
- Compatibility List
- Product safety
The r.LINK interface enables the connection of a reversing camera to the vehicle manufacturer's factory navigation system.
Product features
- Plug and play interface
- Integration into the factory infotainment system
- Rear view camera input (NTSC cameras only)
- Rear view camera image display up to approx. 5 km/h
- Automatic switching to rear view camera input when reverse gear is engaged (coding of head unit required)
Compatibility
- Seat Trinax (at least version B and software version 1100. Must be coded to rear view camera on the diagnostic computer)
- Skoda Amundsen, Skoda Bolero (Suitable for head unit with 26-pin connector on the rear. This must be coded to rear view camera on the diagnostic computer)
- Skoda Columbus (At least version B and software version 1100. Must be coded to rear view camera on the diagnostic computer)
- Volkswagen RNS315, VW RNS510 (For RNS510 at least version B and software version 1100. Must be coded to reversing camera on the diagnostic computer)
- Volkswagen RCD510, VW RNS310 (Suitable for head unit with 26-pin connector on the rear. This must be coded to rear view camera on the diagnostic computer)
- Only for vehicles WITHOUT factory rear view camera.
Restrictions
- Factory TV tuner: Must NOT be installed
- After-market rear view camera: Only NTSC cameras compatible
- Coding: The head unit must be coded to rear view camera via diagnostic computer. This is possible for RNS510/Columbus/Trinax and RCD510 with our optionally available OBD encoder OBD-VW-R-
Product features
- Plug and play interface
- Integration into the factory infotainment system
- Rear view camera input (NTSC cameras only)
- Rear view camera image display up to approx. 5 km/h
- Automatic switching to rear view camera input when reverse gear is engaged (coding of head unit required)
Compatibility
- Seat Trinax (at least version B and software version 1100. Must be coded to rear view camera on the diagnostic computer)
- Skoda Amundsen, Skoda Bolero (Suitable for head unit with 26-pin connector on the rear. This must be coded to rear view camera on the diagnostic computer)
- Skoda Columbus (At least version B and software version 1100. Must be coded to rear view camera on the diagnostic computer)
- Volkswagen RNS315, VW RNS510 (For RNS510 at least version B and software version 1100. Must be coded to reversing camera on the diagnostic computer)
- Volkswagen RCD510, VW RNS310 (Suitable for head unit with 26-pin connector on the rear. This must be coded to rear view camera on the diagnostic computer)
- Only for vehicles WITHOUT factory rear view camera.
Restrictions
- Factory TV tuner: Must NOT be installed
- After-market rear view camera: Only NTSC cameras compatible
- Coding: The head unit must be coded to rear view camera via diagnostic computer. This is possible for RNS510/Columbus/Trinax and RCD510 with our optionally available OBD encoder OBD-VW-R-
CAS GmbH
In den Fuchslöchern 3
D-67240 Bobenheim-Roxheim
Geschäftsführer: Dariusz Sarna, Darius Schnell
Registergericht: Amtsgericht Ludwigshafen am Rhein
Registernummer: HRB 61154
UST.-ID : DE259961142
WEEE-Reg.-Nr: DE 47011033
LUCID-Nr: DE3819542434392
Average customer rating:
Number of Customer reviews: 1
Item reviews
Ingo Göthlichanonymous
ohne Probleme verbaubar
Review from 09.12.2014|Verified purchase
Der Converter ging ohne Probleme zu Verbauen und funktionierte nach erfolgter Freischaltung ohne Probleme. Schlafmodus vom Auto ist wichtig sonst geht nix. auch nach jedem Stecker ziehen am Steuergerät ist dieser notwendig
1010 customers found this information helpful.
