NAVLINKZ Video interface for AHD/FBAS/HDMI suitable for MB MBUX NTG6

Video feeder for reversing camera, front camera with automatic and two other video sources. FBAS and AHD-capable, additional HDMI input. Suitable for Mercedes Benz vehicles with MBUX NTG6 systems with 7 inch or 10.25 inch monitor.

Product features
Video feeder for factory infotainment systems
1 FBAS/AHD input for rear view camera
1 FBAS/AHD input for front camera
2 FBAS/AHD inputs for side cameras or other retrofit devices (e.g. USB devices, DVB-T2 tuner, etc.)
All inputs NTSC and PAL compatible
Supported AHD resolutions 720p NTSC (30Hz), 720p PAL (25Hz), 960p NTSC (30Hz), 960p PAL (25Hz), 1080p NTSC (30Hz), 1080p PAL (25Hz)
1 HDMI input for HD rear view camera or other HDMI source (e.g. iOS/Android device, laptop, streaming stick, DVB-T2 tuner, etc.)
Automatic switching to reversing camera input in reverse gear
Automatic front camera switching after reverse gear for 5, 10, 15 or 20 seconds
Driveway lines for reversing camera can be activated (not available for all vehicles)
Image free while driving (ONLY for fed-in video sources)

Compatibility
Mercedes Benz A-Class (W177) from 05/2018, Comand Online NTG6/MBUX with 7 inch, 10.25 inch or 12 inch monitor
Mercedes Benz B-Class (W247) from 12/2018, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz Citan (W420) from 10/2021, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz CLA Coupé (C118) from 03/2019, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz CLA Shooting B (X118) from 07/2019, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz E-Class (W213) from approx. 06/2020, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz EQC (N293) from 2019, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz GLA (H247) from 02/2020 Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz GLB (X247) from 09/2019,Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz GLC (X253) model years from 2019, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz GLE Coupé (C167) model years from 2019,Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz GLE SUV (W167) model years from 2019, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz GLS-Class (X166) model years from 2019,Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz Sprinter (W907/910) model years from 2018, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz T-Class (W420) from 2022, Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor
Mercedes Benz V-Class (W447) from approx. 03/2020 Comand Online NTG6/MBUX with 7-inch, 10.25-inch or 12-inch monitor

Restrictions
CAN bus compatibility The CAN bus compatibility of the interface may be restricted for some vehicles either completely or for individual functions. This may be noticeable both during installation and later. The interface with all video inputs can be operated with analog switching signals without connection to the vehicle CAN bus. In this case, individual additional functions are omitted, see below.
Only video interface does not feed in audio signals. To feed in audio signals, any existing factory audio AUX input or optional products must be used (e.g. AUX-UNI0x, FM modulator).
Factory reversing camera Automatic switchover to RFK input only takes place as long as reverse gear is engaged. Optional accessories are required for different switching times.
After-market front camera Switching to front camera takes place automatically after reverse gear is engaged for 5, 10, 15 or 20 seconds (depending on OSD menu setting). Manual switching to front camera is also possible via the external button.
Route lines If the vehicle CAN bus is not fully compatible with the interface or if the connection is analog, the route lines function cannot be used.
Factory OBD socket The permanent connection of an OBD dongle product, e.g. for a fuel app or an electronic logbook, may lead to partial non-switching to the reversing camera if the switching signal is obtained from the CAN bus. In this case, an external switching signal from the reversing light and a NO relay or interference suppression filter are required to install a reversing camera.
Vehicles with active parking assistant system 235 It is not possible to display the camera image while the factory-fitted active parking assistant system 235 is in use.

Connections
Image feed: Double-Fakra
Power and CAN bus: Open cable ends
Video inputs (2x): Cinch sockets
Rear view camera input: Cinch socket
Front camera input: Cinch socket
Trigger lines (4x): Open cable ends
Additional video input: HDMI
HDMI audio output: 3.5mm jack socket


Technical specifications
Operating voltage 12V DC (9~16V)
Quiescent current approx. 6mA
Current consumption 310mA
Video input 0.7~1V
Video input signal types FBAS/AHD/HDMI
Signal standards FBAS/AHD NTSC/PAL
Temperature range -40°C to +85°C
Video box dimensions 115 x 25 x 109mm (W x H x D)