RETROSOUND Design "Becker Black" DAB+ complete set with accessories

RETROSOUND DAB+ car radio in "Becker Black" design

SCOPE OF DELIVERY
- RETROSOUND display unit , article number: RETRORADIO-CB-FACE
- RETROSOUND control knob, article number: RSP-039P
- RETROSOUND control ring, article number: RSP-090P
- RETROSOUND DIN face, article number: RSP-308
- RETROSOUND inserts, article number: RSP-509
- AMPIRE ISO installation kit, article number: RSP-KIT-1
- confirmation from TÜV Süd, article number: H-KENNZEICHEN



RADIO MODULE VARIANTS

MOTOR-1DAB

FEATURES
- DAB+/UKW/MW radio receiver with RDS and 30 station presets
- Tuner with European even and odd radio frequencies
- Warm white LCD illumination
- Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
- 3 equalizer programs plus individual bass/treble/fader/balance adjustment
- XBAS loudness function
- Non-volatile memory
- AUX input (3.5mm jack socket) on the back of the device
- Separate switch-on cables for motorized antenna and amplifier

TECHNICAL DATA
- FM European radio frequency range 87.5-107.9 MHz. (0.05 MHz. in steps)
- MW frequency range 530-1710 kHz (9 kHz. in steps)
- DAB+ reception via SMB antenna input for passive DAB+ antennas
- Radio module dimensions 100x110x51mm
- Power supply 10.5 to 14.4 volts
- Maximum current consumption 15 amps
- Quiescent current 3.5 mA
- Sine wave output power 12V, 4 Ohm, <1% distortion: 4x18 Watt (RMS)
- Speaker impedance 4-8 Ohm
- Input sensitivity AUX1 >300 mV / 6 kOhm



MOTOR-1DAB-1

FEATURES
- DAB+/UKW/MW radio receiver with RDS and 30 station presets
- Tuner with European even and odd radio frequencies
- Warm white LCD illumination
- Bluetooth A2DP audio playback for wireless smartphone integration
- Bluetooth hands-free system including a microphone
- Sine wave output power 12V, 4 Ohm, <1% distortion: 4 x 25 watts (RMS)
- 3 equalizer programs plus individual bass/treble/fader/balance adjustment
- XBAS loudness function
- Non-volatile memory
- AUX input (3.5mm jack socket) on the back of the device
- Separate switch-on cables for motorized antenna and amplifier

TECHNICAL DATA
- FM European radio frequency range 87.5-107.9 MHz. (0.05 MHz. in steps)
- MW frequency range 530-1710 kHz (9 kHz. in steps)
- DAB+ reception via SMB antenna input for passive DAB+ antennas
- Radio module dimensions 100x110x51mm
- Power supply 10.5 to 14.4 volts
- Maximum current consumption 15 amps
- Quiescent current 3.5 mA
- Output power 12V, 4 Ohm, <1% distortion: 4x25 Watt (RMS)
- Speaker impedance 4-8 Ohm
- Input sensitivity AUX1 >300 mV / 6 kOhm



MOTOR-6DAB

FEATURES
- DAB+/UKW/MW radio receiver with RDS and 30 station presets
- Bluetooth A2DP audio playback for wireless smartphone integration
- Bluetooth hands-free system including a microphone
- Adjustable LCD illumination with 32,000 different colors
- Sine wave output power 12V, 4 Ohm, <1% distortion: 4 x 25 watts (RMS)
- 2 USB inputs on the back of the device up to max. 32GB
- 1 AUX input (3.5mm) on the back of the device
- 3 cinch outputs (stereo) for external power amplifiers (front/rear/subwoofer)
- 3 equalizer programs plus individual bass/treble/fader/balance setting
- XBAS loudness function
- Non-volatile memory
- Separate power-on cables for motorized antenna and amplifier

TECHNICAL DATA
- FM European broadcasting frequency range 87.5-107.9 MHz. (0.05 MHz. in steps)
- MW frequency range 530-1710 kHz (9 kHz. in steps)
- DAB+ reception via SMB antenna input for passive DAB+ antennas
- Radio module dimensions 100x110x51mm
- Power supply 10.5 to 14.4 volts
- Maximum current consumption 15 amps
- Quiescent current 3.5 mA
- Sine wave output power 12V, 4 Ohm, <1% distortion: 4x25 Watt (RMS)
- Speaker impedance 4-8 Ohm
- Cinch output 2.85 Volt for external amplifier
- Input sensitivity AUX >300 mV / 6 kOhm



OPTIONAL ANTENNA ACCESSORIES
Passive rod or telescopic antennas were installed in most classic vehicles. These are also suitable for DAB+ radio reception. With windshield antennas or electronically amplified roof antennas, you must install a separate DAB+ antenna (e.g. DAB2) and cannot use the DAB1.
DAB1 - AMPIRE DAB+ antenna splitter
Passive rod or telescopic antennas are installed in most classic vehicles. These are also suitable for DAB+ radio reception. In this case, order the DAB1 antenna splitter at the same time. For windshield antennas or electronically amplified roof antennas, you must install a separate DAB+ antenna.
DAB2 - AMPIRE DAB+ adhesive glass antenna
Glass adhesive indoor antenna with favorable reception characteristics. Unobtrusive, theft-proof and safe from vandalism. It also makes no wind noise and is ideal for connecting to your RetroSound car radio.



OPTIONAL AMPLIFIER
Add an extra Plug&Play amplifier to your RetroSound radio for a much better sound while driving. The Quadraphonic amplifier developed by RetroSound delivers 4x 45 watts RMS and fits into any car thanks to its small design.
QUDRAPHONIC - RetroSound amplifier



OPTIONAL CABLE CONNECTION SET
UTVIK - AMPIRE cable connection set
This 142-piece set contains everything you need for wiring and cable routing of your RetroSound car radio: crimping pliers, 70x red 4mm round plugs 0.5-1.5mm², 70x red 4mm round receptacles 0.5-1.5mm² and fabric adhesive tape.



H-LABEL
Any concerns that your H license plate may be in danger due to the installation of a RetroSound car radio are unfounded. In the download you will find a confirmation with the approval of the complete AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) which states that the RetroSound Model Zuma and the RetroSound Model Two including vehicle-specific panel and control buttons may be installed in classic cars with an H license plate or do not prevent the H license plate from being issued!

E-APPROVAL
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00