RETROSOUND radio module (FM / DAB+) including installation material

The "MOTOR-7" is a radio module with all cables and accessories but without the display unit. This display unit, the operating buttons and the rear operating rings must be ordered separately.

It has a Bluetooth hands-free system and A2DP audio streaming. Of course, the "MOTOR-7" radio module also supports the flexible "InfiniMount" mounting system for the control unit, patented by RetroSound. With this device you get the design of your classic and you don't have to do without modern digital media. One USB and one AUX inputs on the rear of the device allow you to play external audio players.

FEATURES
- Playback of MP3 and WMA files via the rear USB input
- Bluetooth hands-free kit with A2DP audio streaming
- Adjustable LCD lighting with 32,000 different colors
- DAB + / FM / MW radio receiver with RDS and 30 station presets
- Tuner with European even and odd radio frequencies
- Integrated 4-channel amplifier (4x 24 watts RMS / 45 watts max.)
- 2 stereo cinch outputs for external amplifiers (front / rear)
- 3 equalizer programs plus individual bass / treble / fader / balance setting
- XBAS loudness function
- Non-volatile memory

EXTENSION POSSIBILITIES
- 1 USB inputs (rear of device) up to max.32GB
- 1 AUX inputs (stereo)
- 2 cinch outputs (stereo) for external amplifiers (front / rear)
- Separate switch-on line for motor antenna and amplifier

SCOPE OF DELIVERY
- Basic radio module
- main wiring harness
- ISO connection cable (power & speaker harness)
- Screw and fastening material
- Microphone for hands-free function
- spacers
- Mounting plate with accessories
- mounting bracket

TECHNICAL DATA RADIO PART
- FM European broadcasting frequency range 87.5-107.9 MHz. (0.05 MHz. In steps)
- MW frequency range 530-1710 kHz (9 kHz. In steps)
- DAB+ reception via SMB antenna input for passive DAB + antennas

GENERAL DATA
- Dimensions of the basic radio unit 101x51x136mm
- Power supply 10.5 to 14.4 volts
- Maximum power consumption 15 amps
- Quiescent current 3.5 mA
- Output power 12V, 4 ohms, <1% distortion: 4x15 watts sinus
- Speaker impedance 4-8 ohms
- Cinch outputs 4 channel 2.85 volts for external amplifiers (front / rear)
- Input sensitivity AUX1> 300 mV / 6 kOhm

E-APPROVAL
- E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00

VEHICLES WITH 6 VOLT ON-BOARD POWER SUPPLY
You need a voltage converter if you want to operate a RetroSound car radio in a vehicle with a 6 volt electrical system. We recommend the DC / DC converter 2238.0 from Statron (www.statron.de) in such a case.

*IMPORTANT NOTE
Please order the display unit and control buttons for your car separately. These are not included in the scope of delivery of the car radio.

COMPATIBLE DISPLAY UNITS
- DETROIT
- HUNTINGTON
- MONTEREY
- NEW YORK
- NEWPORT
- REDONDO-RS
- RETRO-RADIO-B
- RETRO-RADIO-BC
- RETRO-RADIO-C
- RETRO RADIO CB
- RETRO-RADIO-IVO
- SANTA CRUZ
- WONDERBAR WB1
- WONDERBAR WB2

INCOMPATIBLE DISPLAY UNITS
- APACHE
- REDONDO-RT
- GRAND PRIX