EAN-no.: 688168695759
- Description
- H-Kennzeichen
- Download
- Video
- E-Mark
- CE Declaration of Conformity
It has a Bluetooth hands-free system, A2DP audio streaming and Apple iPod / iPhone control. The touchscreen operation of the Apple iPod / iPhone is still active in parallel. Of course, the "MOTOR-6" radio module also supports the flexible "InfiniMount" mounting system for the control unit, patented by RetroSound. With this device you get the design of your classic and you don't have to do without modern digital media. Two USB and two AUX inputs on the rear of the device allow you to play external audio players.
FEATURES
- Playback of MP3 and WMA files via the rear USB input
- Apple iPod / iPhone control (touchscreen control of the Apple iPod / iPhone is still active in parallel)
- Bluetooth hands-free kit with A2DP audio streaming
- Adjustable LCD lighting with 32,000 different colors
- DAB + / FM / MW radio receiver with RDS and 30 station presets
- Tuner with European even and odd radio frequencies
- Integrated 4-channel amplifier (4x 24 watts RMS / 45 watts max.)
- 3 stereo cinch outputs for external amplifiers (front / rear / subwoofer)
- 3 equalizer programs plus individual bass / treble / fader / balance setting
- XBAS loudness function
- Non-volatile memory
EXTENSION POSSIBILITIES
- 2 USB inputs (rear of device) up to max.32GB
- 2 AUX inputs (stereo)
- 3 cinch outputs (stereo) for external amplifiers (front / rear / subwoofer)
- Separate switch-on line for motor antenna and amplifier
SCOPE OF DELIVERY
- Basic radio module
- main wiring harness
- ISO connection cable (power & speaker harness)
- Screw and fastening material
- Microphone for hands-free function
- spacers
- Mounting plate with accessories
- mounting bracket
TECHNICAL DATA RADIO PART
- FM European broadcasting frequency range 87.5-107.9 MHz. (0.05 MHz. In steps)
- MW frequency range 530-1710 kHz (9 kHz. In steps)
- DAB + reception via SMB antenna input for passive DAB + antennas
IPOD / IPHONE COMPATIBILITY
You can of course operate an Apple iPhone wirelessly via Bluetooth with this car radio. If you want to control it wired, you also need a corresponding USB adapter cable.
GENERAL DATA
- Dimensions of the basic radio unit 101x51x136mm
- Power supply 10.5 to 14.4 volts
- Maximum power consumption 15 amps
- Quiescent current 3.5 mA
- Output power 12V, 4 ohms, <1% distortion: 4x15 watts sinus
- Speaker impedance 4-8 ohms
- Cinch outputs 6 channel 2.85 volts for external amplifiers (front / rear / subwoofer)
- Input sensitivity AUX1> 300 mV / 6 kOhm
- Input sensitivity AUX2> 300 mV / 6 kOhm
LEGAL NOTICE
iPod and iPhone are trademarks of APPLE Computer, registered in the US and other countries. For best results, Apple has established specific compatibility requirements for accessory manufacturers. Products that are designed and certified as compatible have the "Made for" label on the packaging. To ensure compatibility when purchasing third-party accessories for use with your device, look for accessories labeled "Made for" for your device (see below).
"Made for iPod" means that an additional electronic device has been designed to connect specifically to the iPod and has been certified by the developer to meet Apple performance standards.
"Made for iPhone" means that an additional electronic device has been specially designed to connect to the iPhone and has been certified by the developer to meet Apple performance standards.
E-APPROVAL
- E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00
VEHICLES WITH 6 VOLT ON-BOARD POWER SUPPLY
You need a voltage converter if you want to operate a RetroSound car radio in a vehicle with a 6 volt electrical system. We recommend the DC / DC converter 2238.0 from Statron (www.statron.de) in such a case.
*IMPORTANT NOTE
Please order the display unit and control buttons for your car separately. These are not included in the scope of delivery of the car radio.
COMPATIBLE DISPLAY UNITS
- DETROIT
- HUNTINGTON
- MONTEREY
- NEW YORK
- NEWPORT
- REDONDO-RS
- RETRO-RADIO-B
- RETRO-RADIO-BC
- RETRO-RADIO-C
- RETRO RADIO CB
- RETRO-RADIO-IVO
- SANTA CRUZ
- WONDERBAR WB1
- WONDERBAR WB2
INCOMPATIBLE DISPLAY UNITS
- APACHE
- REDONDO-RT
- GRAND PRIX
Ich wollte mich noch einmal für die viele Mühe von Ihnen Bedanken, bezüglich des dab-Splitters vor einigen Wochen.
Dank Ihrer umfangreichen Analyse konnte ich das Problem schnell mit einem einfachen Zündkondensator an der Lichtmaschine lösen.
Das Radio funktioniert seitdem in allen Funktionen wie es soll und ich muss sagen, der Einbau eines dab+ Radios hat sich absolut gelohnt !
Vielleicht werde ich das Radio auch in ein paar Jahren in meinen Trabant P50 einbauen, wenn er restauriert wird...
Der nächste Schritt wird nun die Diebstahlsicherung mit GPS Sensor und der Einabu einer Dash Cam. Aber das wird noch etwas dauern.. :-)
Viele Grüße
Georg
Ware ist da, eingebaut.... Naja, was soll ich sagen.... ES IST DER HAMMER!!!!
Qualität Top, Preis-Leistung Top, Support Top.....
Da werden wir uns noch öfter mal hören.
Ich für meinen Teil werde für meine Autos noch was ordern, mal ne Instagram Story dazu oder ein Beitrag, sowas muss man echt publik machen.
Ich und auch meine Mitarbeiter sind mehr als Begeistert!!!!
Bis bald Herr Mohren!!!!
LG, André Ranzinger