EAN-no.: 4260052636060
- Description
- Download
- CE Declaration of Conformity
- Video Tutorials
The connection is easily set up and automatically restored via Bluetooth® 4.0. The BTR series uses the Bluetooth® protocol for headphones on your smartphone and does not affect the functionality of your Bluetooth® handsfree.
The BTR100 Bluetooth® receiver is designed for navigation and car stereo systems with RCA input and an on-board power supply of 12 volts.
CONNECTIONS
- Sound output: Cinch (RCA)
- Power supply: +12V ignition (ACC/K15) with fuse 2A
- Remote output: Blue cable +12VDC/20mA
EQUIPMENT:
- splash-proof design, marine certified
- automatic switch on
- automatic remote output
- QDL licensed Bluetooth® 4.0 CRS I9chip (CSR8635)
- A2DP in highest EDR specification
- BT audio streaming also of lossless files like Wave, Flac, Lossless, etc.
- Cinch (RCA) connectors with signal output 1.0V
- SSID display name: BTR100
- 10m range
SMARTPHONE COMPATIBILITY
- Android
- Apple iOS
- Microsoft
OPTIONAL ACCESSORIES
PRC-1 AMPIRE Bluetooth® remote control
55100-CINCH AMPIRE interference suppression filter
TECHNICAL DATA:
- Voltage: +12V DC
- Current consumption including remote output: <65mA
- Voltage/current remote output: +12V DC, max.20mA
- Bluetooth® 4.0
- CSR8635 chip
- Frequency range: 20Hz-20kHz
- Encoding: Low Complexity Subband Codec (SBC)
- Bit rate: up to 345 kBit/s.
- Audio output voltage: 1V RMS
- Bluetooth® 4.0 / Transmitting power <10mW EIRP
- Housing dimensions: Height: 20mm, Width: 65mm, Length: 50mm
- Blue: Remote output +12V/20mA (0.459mm² or 26x 0.15mm), 305mm length
- Red: +12V ignition (ACC) fuse 2A (0.459mm² resp. 26x 0.15mm), 305mm length
- Black: Ground (0,459mm² resp. 26x 0.15mm), 305mm length
- Cinch plug: red= right, white= left
BLUETOOTH APPROVAL:
- Declaration ID D025151
- Referenced Qualified Design ID 56386
- Listing Date 08 December 2014
PAIR A DEVICE:
- make sure Bluetooth® is switched on in your device
- switch on the ignition
- the LED (6) flashes blue (pairing mode)
- Select "BTR100" in the Bluetooth® menu of your device to connect.
- after successful connection, the LED lights up permanently and a single beep sounds over the audio system.
NOTE:
- up to 9 devices can be connected to the BTR100, but only one device can stream music at a time.
- the BTR100 always remembers the last device that was tuned in and connects automatically when it is switched on.
- a connection to another device must be made manually, as described above
- if the connected device is out of range for more than one minute, the connection is automatically interrupted and the BTR100 goes into pairing mode [the LED (6) flashes].
- can only be used in vehicles and not in continuous operation
OPERATION:
- all settings, such as volume, music selection and play/pause are made on your unit
- the BTR100 can be installed out of sight as it has no controls or buttons to operate.