AMPIRE rear parking aid, 4-way, matt black, from the front and substructure mounting, waterproof

You've finally found a parking space. You don't want to hold up the traffic behind you any longer than necessary, and the parking space isn't that big. Now you need to act quickly but with a clear view. Because a little carelessness can have fatal consequences. A small parking bump can quickly result in costs of EUR 500 or more.

Like a passenger who guides you with a keen eye, the waterproof AMPIRE rear parking aid helps you with this small challenge - only much faster and more reliably. This system, specially developed for open vehicles and trailers, is activated automatically when reverse gear is engaged and allows you to monitor the rear area without interruption. You are warned of obstacles in good time acoustically, thus protecting you from personal injury and property damage - and parking becomes child's play. The sensors can be attached under trailers, flatbeds or other open structures using the substructure brackets provided. The wireless transmission to the loudspeaker takes place at 2.4GHz and is suitable for vehicles and trailers up to a maximum length of 30m.

Your advantages at a glance
- Complete monitoring behind the vehicle
- Automatic activation when reverse gear is engaged
- Timely warning of obstacles
- Avoidance of personal injury and property damage
- Easy parking in tight parking spaces
- Self-diagnosis function
- Acoustic warning
- 4 ultrasonic sensors for bumper mounting from the front or for mounting under the vehicle / trailer.
- 22mm drill hole, 24mm installation depth
- Range adjustable between 30cm to 100cm and 30cm to 260cm
- Range (factory setting) from 160cm to 30cm
- Very simple installation using plug connections
- Wireless connection between the control unit and the loudspeaker, maximum range 30m
- Waterproof housing
- E-type approval E24 10R-06 1287

Technical data
- Ultrasonic frequency: 58kHz
- Radio frequency between control unit and loudspeaker: 2.4GHz
- Temperature range: -40°C to +80°C
- Operating voltage: 10-30VDC
- Power consumption of control unit (max): 55mA
- Speaker current consumption (max): 80mA
- ACC current consumption off: 0mA
- Sensor cable lengths: 235cm
- Ranges
Level 1: 30-100cm
Level 2: 30-130cm
Level 3: 30-160cm (factory setting)
Level 4: 30-210cm
Level 5: 30-260cm
- Total weight: 512g

OPTIONAL ACCESSORIES
- Sheet metal punch 22mm: PW220

IMPORTANT NOTE
Please connect the positive connection of the loudspeaker to the ignition cable (KL15).
Installation of the sensors in metal bumpers is not possible with optional accessories.