AMPIRE parking aid, 4-way, matt black, sensor installation from the front

You've finally found a parking space. You don't want to hold up the traffic behind you any longer than necessary and the parking space isn't that big. Now you have to act quickly but with a clear view. Because a little carelessness can have fatal consequences. A small parking bump can quickly result in costs of EUR 500 or more.

Like a passenger who guides you with a keen eye, the AMPIRE parking aid helps you with this small challenge - only much faster and more reliably. The system activates automatically when reversing and allows you to monitor the area behind you without interruption. You are warned acoustically of obstacles in good time and thus protected from personal injury and property damage - and parking becomes child's play. The sensors are installed almost flush in the bumper.

Your advantages at a glance
- Complete monitoring of the rear area
- Timely warning of obstacles
- Avoidance of personal injury and property damage
- Easy parking in tight parking spaces
- Self-diagnosis function
- Acoustic warning
- Automatic activation when reversing
- 4 ultrasonic sensors for bumper mounting from the front
- 22mm bore hole, 24mm installation depth
- Range adjustable between 30cm to 100cm and 30cm to 260cm
- Range (factory setting) from 160cm to 30cm
- Very simple installation using plug connections
- Wireless connection between the control unit and the loudspeaker
- E-type approval E24 10R-06 1287

Technical data
- Ultrasonic frequency: 58kHz
- Radio frequency between the control unit and loudspeaker: 2.4GHz
- Temperature range: -40°C to +80°C
- Operating voltage: 10-30VDC
- Power consumption of control unit (max): 55mA
- Speaker current consumption (max): 80mA
- ACC current consumption off: 0mA
- Sensor cable lengths: 235cm
- Ranges
Level 1: 30-100cm
Level 2: 30-130cm
Level 3: 30-160cm (factory setting)
Level 4: 30-210cm
Level 5: 30-260cm
- Total weight: 485g

OPTIONAL ACCESSORIES
- Sheet metal punch 22mm: PW220

IMPORTANT NOTE
Please connect the positive connection of the speaker to the ignition cable (KL15).
It is not possible to install the sensors in metal bumpers.