FOCAL high-low adapter with impedance simulation (FOAXACHILO10000)

FOCAL high-low adapter with impedance simulation
To supply your amplifiers with a suitable and qualitative audio signal while retaining your original head units and associated OEM controls, you can choose the HILO-V3 converter.
HILO-V3 converts a stereo amplified signal into two low-level line outputs, eliminates parasitic interference and creates separate grounds. You can now use one amplifier easily and without interference. It is now very easy to create a high-quality hi-fi system in your car. The selectable detection of DC and AC voltages makes the HILO compatible with all head units from the original manufacturer.
HILO-V3 has been fully developed by Focal and is available from generation 3 with an impedance simulator This creates a speaker simulation network to avoid muting the head unit.

Features
Converts an amplified stereo signal into two low-level line outputs for a stereo amplifier.
Eliminates noise through separate ground
Selectable DC and AC voltage detection - full compatibility with all OEM head units.
Automatically generates a remote signal to activate the associated amplifier
Can be used in passive mode without 12V power supply (in this case the remote output will not work)

Technical data
Frequency response 10 Hz - 80 kHz (+/- 1dB)
Signal-to-noise ratio > 100dB
Distortion < 0.01%
Automatic remote control output below 0.01%
Stop & Start compatible Automatic
DC detection threshold 5.2 V for 14.4 V input voltage
AC detection threshold 22 mV @ 1 kHz

Further search terms
HILO.V3, F-HILOV3