EAN-no.: 4260052639399
- Description
- Download
- CE Declaration of Conformity
- Video
The connection is easily set up and automatically restored via Bluetooth 4.0. The BTR series uses the Bluetooth protocol for headphones on your smartphone and does not affect the functionality of your Bluetooth hands-free car kit.
The BTR200X Bluetooth receiver is designed for navigation and car stereo systems with a 3.5 mm jack input and an on-board power supply of 12 volts.
Bluetooth® listening in CD quality with aptX®?
As an alternative to standard Bluetooth®, we also have receivers with the Bluetooth® aptX® codec. This codec is becoming more and more popular. If you use devices with the aptX standard, you can significantly improve the sound quality of your Bluetooth streams.
What does Bluetooth® aptX® improve?
The aptX® codec uses a more efficient method of compressing audio data that makes better use of the available bandwidth. The prerequisite for aptX® streams is that the playback device as well as the transmitter also support Bluetooth aptX®. The function can be recognised by the aptX® lettering on the device. The codec supports the common audio formats such as MP3 and FLAC.
Which smartphones support Bluetooth® aptX®?
Not all Android smartphones support the Bluetooth codec aptX®. You can check whether your Android smartphone is compatible in the technical data of your smartphone. An Apple iPhone does not support the Bluetooth codec aptX®.
CONNECTIONS
- Sound output: 3.5mm jack plug
- Power supply: +12V ignition (ACC/K15) with fuse 2A
- Remote output: Blue cable +12VDC/20mA
EQUIPMENT
- 3.5mm jack plug with signal output 1.0V
- splash-proof, marine certified
- automatic power on
- Automatic remote output (+12V DC)
- QDL licensed Bluetooth 4.0 (CSR8645)
- A2DP in highest EDR specification
- aptX audio codec from Qualcomm®.
- BT audio streaming also of lossless files such as Wave, Flac, Lossless, etc.
- SSID display name: BTR200X
- 10m range
SMARTPHONE COMPATIBILITY
- Android (Bluetooth and Bluetooth aptX®)
- Apple iOS (Bluetooth)
OPTIONAL ACCESSORIES
PRC-1 AMPIRE Bluetooth remote control
55100-KLINKE AMPIRE interference suppression filter
TECHNICAL DATA:
- Voltage: +12V DC
- Current consumption including remote output: <65mA
- Voltage/current remote output: +12V DC, max.20mA
- Bluetooth 4.0
- CSR8645 chip
- aptX audio codec by Qualcomm®.
- Frequency range: 20Hz-20kHz
- Encoding: Low Complexity Subband Codec (SBC)
- Bit rate: up to 384 kbps (48 kHz sampling)
- Audio output voltage: 1V RMS
- Bluetooth 4.0 / Transmit power <10mW EIRP and aptX
- Housing dimensions: Height: 20mm, Width: 65mm, Length: 50mm
- Red cable: +12V (0.459mm² or 26x 0.15mm), 305mm length
- Black cable: ground (0.459mm² resp. 26x 0.15mm), 305mm length
- Blue cable +12VDC/20mA (0.459mm² resp. 26x 0.15mm), 305mm length
BLUETOOTH APPROVAL:
- Declaration ID D025151
- Referenced Qualified Design ID 56386
- Listing Date 08 December 2014
PAIR A DEVICE:
- make sure Bluetooth is switched on in your device
- switch on the ignition
- the LED (6) flashes blue (pairing mode)
- Select "BTR200X" in the Bluetooth menu of your device to connect.
- after successful connection, the LED lights up continuously and a single beep sounds over the audio system.
NOTE:
- up to 9 devices can be connected to the BTR200X, but only one device can stream music at a time
- The BTR200X always remembers the last tuned device and connects automatically after power on.
- a connection to another device must be done manually, as described above
- if the connected device is out of range for more than one minute, the connection is automatically interrupted and the BTR200X goes into pairing mode [the LED (6) flashes].
- can only be used in vehicles and not in continuous operation
OPERATION:
- all settings, such as volume, music selection and play/pause are made on your unit
- The BTR200X can be installed out of sight as it has no controls or buttons to operate.
OTHER SEARCH TERMS
BTR200, btr200