AMPIRE Bluetooth Receiver with Auto-Remote Output, RCA Output

Item no.:  BTR100
AMPIRE Bluetooth Receiver with Auto-Remote Output, RCA Output - Image 1
AMPIRE Bluetooth Receiver with Auto-Remote Output, RCA Output - Image 2
AMPIRE Bluetooth Receiver with Auto-Remote Output, RCA Output - Image 3
AMPIRE Bluetooth Receiver with Auto-Remote Output, RCA Output - Image 1AMPIRE Bluetooth Receiver with Auto-Remote Output, RCA Output - Image 2AMPIRE Bluetooth Receiver with Auto-Remote Output, RCA Output - Image 3
49,00
incl. VAT and excl. shipping
piece
This item notice Article is noted
Availability:(Delivery time: 1-2 days)
  • Description
  • Download
FEATURES
- Marine certified
- with auto turn on function (remote out)
- certified Bluetooth 4.0 CRS I9chip
- RCA output with 1.0V Signal output
- QDL licensed
- SSID Name: BTR100
- Codec: Low Complexity Subband Codec (SBC)
- Bitrate: up to 345 kBit/s.

CONNECTIONS
- Blue: Remote out wire +12V/20mA
- Red: +12V ignition (ACC) Fuse 2A
- Black: GND
- RCA outputs: red= right, white= left

BLUETOOTH LICENSE
- Declaration ID D025151
- Referenced Qualified Design ID 56386
- Listing Date 08 December 2014

PAIRING
- Ensure that your streaming device has Bluetooth enabled.
- Turn the ignition (ACC) on.
- The LED (6) starts blinking (pairing mode).
- Select BTR100 in your devices Bluetooth setup menu.
- When successfully connected, the LED on the BTR100 will stop blinking and remain lit. A single beep will be heard through the connected sound system.

ATTENTION
- Multiple devices can be paired to the BTR100, but only one device can connect at one time.
- The BTR100 will remember the last device which was connected to it and reconnect with it automatically. If that device is not active, then other paired devices can connect manually, or new devices can be paired.
- When a connected device is out of range for more than one minute, the BTR100 will automatically disconnect it and returns to pairing mode [the LED (6) starts blinking].

OPERATING
- Once connected, audio is controlled from the sreaming device. This includes volume and media selection.
- The BTR100 can be installed out of sight, as it has no user controls that needs to be accessed.

SPECIFICATIONS
- Power: 12V DC
- Current consumption: 40mA max.
- Bluetooth 4.0
- Frequency range: 20Hz-20kHz
- Output level: 1V RMS
accessories for this item:
equivalent products for this item:
Average customer rating: 
Number of Customer reviews: 6
Write an online review of this item and show it to other visitors!
Item reviews
176 customers found this review helpful:
Das ist das Ende des Autoradio Zeitalters, 21.02.2016
Author:
Smartphone, Endstufe mit Frequenzweiche und diesen Ampire Bluetooth receiver... Da wird das altbewährte Autoradio völlig überflüssig. In 10 Minuten montiert, sofort Smartphone per Bluetooth gekoppelt, super Soundqualität... Wenn die Musik Wiedergabe gestoppt wird oder die Bluetooth Verbindung beendet wird, schaltet der Ampire Bluetooth receiver den Verstärker/Endstufe automatisch aus. Sobald die Musik Wiedergabe beginnt, wird der Verstärker/Endstufe wieder eingeschaltet. Super praktisch. Jetzt fehlt nur noch eine Ampire App (Android und Apple) um Soundeinstellungen (Equalizer, subwoofer, Frequenzweiche, etc) komfortabler einstellen zu können, als über die Smartphone Einstellungen...
Did you find the review of this item helpful? YesNo
210 customers found this review helpful:
Plug&Play, 20.09.2015
Author:
Ich konnte an meinem Fusion Radio im Boot einfach Plug&Play den BTR100 an den AUX einstecken, Plus und Minus dran. Fertig.
Did you find the review of this item helpful? YesNo
201 customers found this review helpful:
Exzellenter Sound, 20.09.2015
Author:
Hallo, ich habe den Bluetooth Adapter an den AUX Eingang in meinem SLK R171 angeschlossen um über A2DP Musik zu Streamen. Es funktioniert perfekt. Astreiner Sound und der Einbau kostete beim Profi nur €50,00.
Did you find the review of this item helpful? YesNo
View all reviews