AMPIRE reversing (AHD 1080P 25F/CVBS 30F) camera with guide lines, 150°

The KAX505 camera has a high-resolution AHD/CVBS camera integrated into a robust holder for mounting behind the license plate in German EU format. The vertical viewing angle of the camera is, of course, infinitely adjustable to suit the angle of inclination. The video signal is mirrored for mounting at the rear of the vehicle. This product has been developed exclusively for German EU license plates measuring 110x520mm. Please check whether your license plate is compatible before ordering. EU license plates from Austria, for example, are 10mm higher and do not fit in the KAX505.

TECHNICAL DATA
- Video standard AHD 1080P 25F or CVBS 30F
- Image sensor: FH8536H+GC2399
- Image sensor size 1/2.7
- AHD resolution 1920x1080 pixels (CVBS resolution 950x640 pixels)
- 3D noise reduction
- Sequential scanning
- Minimum illumination: 0.005 lux
- Signal-to-noise ratio >50dB
- Automatic white balance
- Horizontally mirrored image reproduction
- Guide lines: switched on (can be switched off by disconnecting the cable loop)
- horizontal viewing angle 127° (CVBS 122°)
- vertical viewing angle 85° (CVBS 80°)
- diagonal viewing angle 145° (CVBS 140°)
- Camera head adjustable up to 20° vertically
- Protection class IP69 waterproof
- Operating voltage: 12/24 volts DC
- Power consumption: max. 75mA
- Operating temperature: -20° to 70°C
- Color: black
- Cable length: 8 meters with blue 4-pin MINI-DIN plugs
- E approval E9*10R06/00*22328*00
- CE approval EN 55022: 2010; EN 61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008; EN 55024:2010
- FCC approval ANSI C63.4-2003

SCOPE OF DELIVERY
- Rear view camera
- AK1037 power supply
- AK1038 mini-DIN extension cable 8m

ORDERING INFORMATION
This camera is a high-resolution AHD camera with 1080P resolution and 30 frames per second when delivered. As an AHD camera, this camera can only be connected to AHD-compatible monitors, car radios, or interfaces that support 1080P 30F. If the camera input on your monitor can only display a video signal in CVBS, FBAS, or NTSC, this camera must be switched to CVBS for an NTSC video signal.

IMPORTANT INSTALLATION INFORMATION
The camera head is waterproof in accordance with DIN protection class IP69K and does not require additional sealing during installation. The camera lens is made of glass and is fragile. All metal parts are made of stainless steel. Stainless steel is rust-resistant because it has a protective layer of chromium oxide. However, this layer can be damaged or degraded under certain conditions, which can lead to the formation of rust film.