AMPIRE rear view camera (AHD), 95°, 35.5mm, universal, black

With the KVA200, Ampire is launching a new AHD reversing camera on the European market that has been specially developed for use on vans / panel vans / motorhomes. The well-known problem: a reversing camera cannot be easily mounted on vehicles with rear doors. If you use a conventional body-mounted camera, you can point it downwards, but the rear of many vehicles is slightly rounded at the top. A normal reversing camera would capture this curvature and thus obscure the trailer coupling, the running board or the bumper.
With the special housing of the reversing camera, the camera module itself is positioned above the curvature and thus captures the entire rear wall, bumper, etc. This makes precise maneuvering possible. This makes precise maneuvering possible, especially when only a few centimeters are involved. The angle of the camera module can be adjusted so that it can be perfectly adapted to the conditions on your vehicle.
Suitable for universal roof mounting on vans and buses such as Mercedes-Benz Sprinter, Fiat Ducato, Volkswagen Crafter and similar vehicles.

HIGHLIGHTS
- Reversing camera specially designed for use in vans, panel vans and motorhomes
- The angle of the camera module can be adjusted for perfect adjustment of the field of vision
- The 10 integrated infrared diodes support visibility even in complete darkness
- Robust workmanship
- Visually appealing design
- Suitable for 24/7 continuous operation

TECHNICAL DATA
- Video standard AHD 1080P 25F
- Image sensor: GC2053 (FH8536H) build-up sphere with 35.5mm diameter
- Image sensor size 1/2.9
- Resolution 1920x1080 pixels
- 3D noise reduction
- Sequential scanning
- Minimum illumination: 0.01 lux
- Infrared illumination for night vision
- Signal-to-noise ratio >43dB
- Automatic white balance
- Image reproduction horizontally mirrored
- Horizontal viewing angle 95
- Vertical viewing angle 70
- diagonal viewing angle 135
- Protection class IP69K waterproof
- Supply voltage 12/24 Volt DC 10%
- Power consumption 1.5 Watt
- Operating temperature range -30°C to +70°C
- Storage temperature -40°C to +80°C
- Camera dimensions 212 x 133 x 74mm (L x W x H)
- Color: black
- Cable length: 10 meters with 4-pin MINI-DIN plugs
- E approval E9-10R-05.1652
- CE approval EN 55022: 2010; EN 61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008; EN 55024:2010
- FCC approval ANSI C63.4-2003

SCOPE OF DELIVERY
Rear view camera
AK1037 Power supply with blue plugs
AK1039 Mini-DIN extension cable 10m with blue plugs

NOTE ON ORDERING
This camera is a high-resolution AHD camera with 1080P resolution and 25 frames/second. This camera can only be connected to compatible monitors, car radios or interfaces. If the camera input on your monitor can only display a video signal in CVBS, FBAS or NTSC, this AHD camera is unsuitable and you should use the identical CVBS camera with NTSC video signal.

LEGAL NOTICE
An increase in vehicle dimensions, with the exception of cars and motorcycles, is subject to registration and must be inspected immediately by the technical inspection authority or an officially recognized inspection organization (DEKRA, GTÜ, KÜS, TÜV). Before installing or modifying the camera, ask an officially recognized expert for motor vehicle traffic or a test engineer from a monitoring organization whether the operating permit will be affected or whether the modification can be approved at all. The return of a used camera for credit is excluded.