AMPIRE Remote Signal Generator

Finally, a Remote Signal for Your Car Radio: The AMPIRE Remote Signal Generator 55000
Do you want to install an amplifier or an active subwoofer in your vehicle, but your factory car radio lacks a remote output? This is a common problem for many car audio enthusiasts. Without a remote signal, the amplifier won't automatically turn on and off with the radio. The result: you have to operate the amplifier manually or risk it constantly drawing power, which can drain your car battery.

The solution is the AMPIRE Remote Signal Generator 55000. This innovative module creates a 12-volt turn-on lead, delayed by about 1 second, as soon as it detects an audio signal. Whether it's a regular audio signal or a speaker signal, the 55000 reliably converts it into a remote wire.

Compatibility and Simple Installation
The AMPIRE 55000 is specifically designed for BTL (Bridge Tied Load) signals. Many modern car radios, especially factory radios, use this technology to achieve higher output power. If you're unsure whether your radio uses a BTL signal, don't worry: most modern OEM radios use this bridged circuit design.

Installation is incredibly simple. Just connect the generator to your radio's speaker wires. As soon as music plays, the 55000 detects the signal and sends the remote signal to your car amplifier or subwoofer. The short turn-on delay of approximately 1 second protects your components from voltage spikes.

Technical Details for Car Hi-Fi Pros
Operating Voltage: 12 volts DC
Output Voltage: 12 volts DC
Maximum Output Current: 1 Ampere
Turn-on Delay: 0.8 to 1.5 seconds
Maximum Quiescent Current: 0.0016A
Maximum Operating Current (on): 0.027A

Additionally, the AMPIRE Remote Signal Generator 55000 can also be used for a phone mute function to automatically reduce the volume for incoming calls. Get the AMPIRE 55000 now and take your car audio system to the next level!

Do you have questions about compatibility or installation? Don't hesitate to contact us!